3rd and 2nd Generation Knex Ipod Nano Stand
by the inventor in Circuits > Apple
2193 Views, 1 Favorites, 0 Comments
3rd and 2nd Generation Knex Ipod Nano Stand
its a stand for the 2nd and 3rd generation ipod nano could also probably be used for other stuff but i don't know what they are yet tell me if you find any more uses!
What You Will Need
you will need:
.one snowflake connector
.two orange connectors
.eight yellow connectors
.four red connectors
.12 green rods
.6 white rods
.two yellow rods
.one red rod
.one largeish rubber band
.a medium sised rubber band
.a few small rubberbands
i think ive counted right if i havent then just ignore me and pay attention to the picture
.one snowflake connector
.two orange connectors
.eight yellow connectors
.four red connectors
.12 green rods
.6 white rods
.two yellow rods
.one red rod
.one largeish rubber band
.a medium sised rubber band
.a few small rubberbands
i think ive counted right if i havent then just ignore me and pay attention to the picture
Base
simply follow the pictures
The Gripping Clamp
once again follow the pictures
The Joining of the Two
simply join the two parts
Finish
your done just remember for the rubber band that squeezes the clamp togeather dont use a really strong one it will damage your ipod!
the green rubber band if you were wondering helps jeep the swivel in position cause you can swivel it to your liking if you have the second generation ipod just replace the two green rods joining the base and the clamp with white ones cause the second generation ipod is taller.
you can even store your headphones at the back!
the green rubber band if you were wondering helps jeep the swivel in position cause you can swivel it to your liking if you have the second generation ipod just replace the two green rods joining the base and the clamp with white ones cause the second generation ipod is taller.
you can even store your headphones at the back!