3dPrinted Ring Light

build a nice and easy ring light for your dslr camera

after many shapes in tinkercad, i made 4 .stl files

the first file is for my pendax k-50 for 18-55 lenses.remake this for your dslr if needed

the diameter of the ring is 140 mm

add instand glue carefully like the pics

check the dimentions for the next step

i dont have black meterial to use and i paint it

make two cicles like the pic and cut the plastic white sheet with scissor

THOSE METERIALS ARE FROM A 20CM-18W-220V LED LIGHT

glue like the pics, the plastic sheet

i use led strip 14.4 watts per meter, cool white

cut carefully the one edge like the pics (check from the fist if it still works)

before you take of the paper from leds make sure if are fits nice

negative outside , +12 inside

solder naked wires or use white cables

test it before next steps

like the pics make one or print one with white meterial

...i don't make .stl file for this...

make a hole at a nice point for the cable, i secure this with some instant glue

TEST IT AGAIN

glue the two rings with the reflector and with the leds

this works with 12 v

if you want you can find a DC to DC converter 5v to 12v to use it with a power bank

FOLLOW ME HERE

AND SUBSCRIBE TO MY YOUTUBE CHANNEL !!!

THANKS !!!