3d Printed Butterfly Comb

This is a 3d printed butterfly comb I made, that can make you look hardcore and keep your beautiful locks neat and stylish at the same time. also serves as a "fidget stick"

If you're printing this, do it with a higher infill, at least 50% so that it doesn't explode or crack while your opening and styling your hair. (note* you may have to resize the handles or comb to make sure they fit, each other and to the size you want

This is what it looks like printed in the separate pieces. I used two wires to fit into the holes instead of 3d printing a connector thing.

Slide wire or other into hole

done, this is what it looks like opened and closed