3d Printable Tinkercad Sunflower Planter
by AngelM213 in Living > Decorating
706 Views, 0 Favorites, 0 Comments
3d Printable Tinkercad Sunflower Planter
![2.jpg](/proxy/?url=https://content.instructables.com/FZF/L21W/JIEU3FEI/FZFL21WJIEU3FEI.jpg&filename=2.jpg)
Hi! The 3D Sunflower planter was designed in Tinkercad. I wanted the planter shape to be inspired by nature, so i chose the shape of sunflower.
Designing
![1.jpg](/proxy/?url=https://content.instructables.com/F7C/WO1J/JIEU3GKX/F7CWO1JJIEU3GKX.jpg&filename=1.jpg)
![3.jpg](/proxy/?url=https://content.instructables.com/F95/533F/JIEU3GL8/F95533FJIEU3GL8.jpg&filename=3.jpg)
![4.jpg](/proxy/?url=https://content.instructables.com/FRD/5IJQ/JIEU3GKS/FRD5IJQJIEU3GKS.jpg&filename=4.jpg)
![5.jpg](/proxy/?url=https://content.instructables.com/F85/S2FJ/JIEU3GLR/F85S2FJJIEU3GLR.jpg&filename=5.jpg)
![6.jpg](/proxy/?url=https://content.instructables.com/F4P/QPT9/JIEU3GMK/F4PQPT9JIEU3GMK.jpg&filename=6.jpg)
I Started by placing a cone on the work plane: top radius =10, base radius=6, height=20, sides=16.Next I duplicated the cone (dimension of duplicate: top radius =8, base radius=4, height=15, sides=16) and moved the duplicate to the top of the first cone.I grouped the two objects together.
Adding Sunflower Petals
![7.jpg](/proxy/?url=https://content.instructables.com/F46/L8NJ/JIEU3HTX/F46L8NJJIEU3HTX.jpg&filename=7.jpg)
![8.jpg](/proxy/?url=https://content.instructables.com/FPT/G9P5/JIEU3HU9/FPTG9P5JIEU3HU9.jpg&filename=8.jpg)
![9.jpg](/proxy/?url=https://content.instructables.com/FMR/S3QS/JIEU3HUL/FMRS3QSJIEU3HUL.jpg&filename=9.jpg)
![10.jpg](/proxy/?url=https://content.instructables.com/F92/PTNV/JIEU3HVJ/F92PTNVJIEU3HVJ.jpg&filename=10.jpg)
![11.jpg](/proxy/?url=https://content.instructables.com/F4I/SN8C/JIEU3HXJ/F4ISN8CJIEU3HXJ.jpg&filename=11.jpg)
![12.jpg](/proxy/?url=https://content.instructables.com/F1C/UFGA/JIEU3HZ4/F1CUFGAJIEU3HZ4.jpg&filename=12.jpg)
Find the sunflower shape, from shape generators(All), and drag the shape on workplane.Set number of fans=16, height =1 and place the shape on top of the cone.Duplicate the sunflower, place it below of the original and rotate it with 11 degrees.Ungroup the first goup. Finally I sellect al shapes and grouped them all.