3Doodled Box With Lid
This is a very simple box with jumprings for hinges allowing the top to move back and forth yet stay attached to the rest of the box.
BoM
3Doodler filament
3Doodler Pen
Jumprings
Square
Outline and Fill
I started my box with an outline and then colored in the edges and kept going around and around in a steady line as best I could. It didn't always work. When all 6 sizes were done, I trimmed them and filled in any holes.
Sides
I started with the bottom and then carefully attached the sides with more filament. I went around until all the sides were attached to the bottom piece as well as each other.
Lid
I poked small, corresponding holes in one side of the box and the lid. Then I slid small jump rings into the holes and twisted them closed.