3D Trophy

This is a trophy made with Onshape

https://www.onshape.com/en/

Make a sketch of the trophy.

Use revolve on the top part of sketch 1.

Extrude the other part of sketch 1.

Add text for the front of the trophy.

Extrude the text

Sketch the text frame on the trophy and extrude.

Sketch and revolve the trophy handles

Sketch and extrude the trophy lower base, they should be different sized SQUARE

Sketch a design to be extrude and loft on the top plane, use section view to see your sketch clearly, I also used the circular pattern tool to make the 5 other profiles.

Extrude design up to part 1, so it will stop when it hits part 1(trophy)

Sketch profile to be loft, I sketched a profile on top of one of the base of the trophy and i also made another profile on a offset plane.

Loft, select the face of extruded part (From Step 10) and sketches(From Step 11) as loft profile.

Six Times.

You're done !! (My handle kinda fell off)