3D RED TRUCK
![RED TRUCK.PNG](/proxy/?url=https://content.instructables.com/FFC/WTMW/KDK8QQWK/FFCWTMWKDK8QQWK.png&filename=RED TRUCK.PNG)
![red truck3.PNG](/proxy/?url=https://content.instructables.com/F69/N4PK/KDK8QS0I/F69N4PKKDK8QS0I.png&filename=red truck3.PNG)
![RED truck2.PNG](/proxy/?url=https://content.instructables.com/F20/FCS2/KDK8QQWL/F20FCS2KDK8QQWL.png&filename=RED truck2.PNG)
I made a 3D red truck using connectors that allow the wheels to turn.
Downloads
Wheels
![Screenshot 2020-08-10 at 11.26.19 AM.png](/proxy/?url=https://content.instructables.com/FUA/EDIO/KDOJ2A9T/FUAEDIOKDOJ2A9T.png&filename=Screenshot 2020-08-10 at 11.26.19 AM.png)
In this step I put four wheels from the connectors and then put rods through them.
Starting the Base
![Screenshot 2020-08-10 at 11.43.44 AM.png](/proxy/?url=https://content.instructables.com/F1C/383T/KDOJ2A8G/F1C383TKDOJ2A8G.png&filename=Screenshot 2020-08-10 at 11.43.44 AM.png)
In this step I attached a rectangular base to the rods and made the headlights using the cube from basic shapes.
Forming the Shape
![Screenshot 2020-08-10 at 12.41.36 PM.png](/proxy/?url=https://content.instructables.com/FZE/TYKS/KDOJ2A8F/FZETYKSKDOJ2A8F.png&filename=Screenshot 2020-08-10 at 12.41.36 PM.png)
In this step I start forming the shape of the truck by getting a rectangle and tilting it at an angle. Then I attach it to the top of the headlights and then attach two more tilted rectangles on the side of the first tilted one.
Finishing the Shape
![Screenshot 2020-08-10 at 12.49.12 PM.png](/proxy/?url=https://content.instructables.com/F8O/NNG6/KDOJ2A8E/F8ONNG6KDOJ2A8E.png&filename=Screenshot 2020-08-10 at 12.49.12 PM.png)
In this step I finish the shape of the truck by adding a rectangle to the tips of the two tilted rectangles then one more rectangle attaching the other rectangle to the base of the truck.
Making the Trunk
![Screenshot 2020-08-10 at 12.52.52 PM.png](/proxy/?url=https://content.instructables.com/FT6/DDLL/KDOJ2A8D/FT6DDLLKDOJ2A8D.png&filename=Screenshot 2020-08-10 at 12.52.52 PM.png)
In this step I form the trunk by putting two rectangles on each side of the back and one more connecting the two.
the Finishing Touches
![Screenshot 2020-08-10 at 12.57.25 PM.png](/proxy/?url=https://content.instructables.com/FN4/5U27/KDOJ2A8C/FN45U27KDOJ2A8C.png&filename=Screenshot 2020-08-10 at 12.57.25 PM.png)
In this step I add the finishing touches by getting two chairs from the OMSI hangout space and attach them to the front and make a steering wheel from the torus shape in basic shapes.