3D Printed T-Rex Pen Holder
by xyzworkshop in Workshop > 3D Printing
3739 Views, 29 Favorites, 0 Comments
3D Printed T-Rex Pen Holder
This cool little 3D print depicts a Low Polygon T-rex at the moments of its last breath struggling against a thick sludge of tar.
Made up of three different parts, this little sculpture serves also as a cool pen holder. Or a business card Holder.
If you like this and our other works, please like and follow us on
https://www.facebook.com/xyzworkshop
Print "TREX.STL" with supports turned on( can be printed at low resolution) and Print "Trex Tar.STL" at your highest resolution to get a smooth effect on the tar.
Join the three pieces, TREX, Rex Tail and tar together using superglue.
Made up of three different parts, this little sculpture serves also as a cool pen holder. Or a business card Holder.
If you like this and our other works, please like and follow us on
https://www.facebook.com/xyzworkshop
Print "TREX.STL" with supports turned on( can be printed at low resolution) and Print "Trex Tar.STL" at your highest resolution to get a smooth effect on the tar.
Join the three pieces, TREX, Rex Tail and tar together using superglue.