3D Printed Jenga Box and Block Stacker

I wanted a way to store my Jenga blocks. At the same time, the box could be used as a stacking tool to help you align and get a perfect stack every time.

I designed it in Sketchup into multiple parts since my 3D printer can't print something that big.

So I used a Da Vinci 1.0 3D printer to do the printing. I printed it using 1.75mm ABS filament. I printed it at 0.2 layer height for a better finish. 0.4 layer height probably would've been faster. So I'd recommend that.

The box is made of 3 pieces glued together. You can use super glue but I would recommend using acetone since it fuses ABS together really well. It's almost like a weld.

Again if you're using ABS, it's a good idea to strengthen your parts by brushing a light coat of acetone over the whole print. It'll melt and create a shell over the many layers making it really strong.

Stack your bricks in the new box. It keeps them organized and ready for the next game.

The box can be used to align your stack so it's perfect every game. Just tilt it upside down and slowly lift the box up to reveal a perfect stack.

Check out my video to see it in action.