3D Printed Face Shields

by Gauravkumar5 in Workshop > 3D Printing

402 Views, 1 Favorites, 0 Comments

3D Printed Face Shields

gaurav @techeonics 3d printed face shield (2).jpg

As we know that in the situation of the Corona Virus Crisis, the doctors and policemen and sanitation workers are doing efforts to control the situation, but they have less Protective equipment for their protection (PPE).

We are making these face shields as second-layer protection for healthcare workers. The face mask has a short lifeline and these shields will withstand longer

Face shields — in addition to N95 face masks, gowns and gloves — are part of the personal protective equipment (PPE) that doctors and nurses desperately need asthey treat patients with COVID-19, the disease caused by a coronavir

For More Info Check https://bit.ly/3a7buK4

Supplies

1) 3D Printed Part

2) A4 Clear Card (clear sleeves)

3) Any Elastic band, round or flat.

3D Printing the Shield Support

SquarePic_20200403_14142551.jpg
3D Printed Face Shield | COVID-19 | TECHEONICS

Using any of 3D printer, print the shield support 3DfaceShield File.

Download the 3d file from Here :- https://bit.ly/Techeonics

PLA Filament will work for this project.

I print at 20% linear fill and it provides more than enough integrity. Print time is about 2hr and 10 minutes at 40 mm/s. 0.2mm resolution

The Assembly Process.

gaurav @techeonics 3d printed face shield (2).jpg

For the shield, we used a standard A4 clear card. Make holes using paper punch

and then attach the A4 Clear card (clear sleeves) to the Shield

Use an elastic band, it can be round or flat. And Attach to the shield on both ends sides

I hope you found this instructable useful.