3D Pattern Resonant Radiance Wall

Design a wall with a 3D pattern featuring built-in NeoPixel LED lights that change color to match your mood and respond to music, creating a beautiful and relaxing atmosphere in your home. The patterns are crafted directly onto the wall with paint, and NeoPixel lights are embedded within them. These lights illuminate according to your mood and the rhythm of the music, bringing a serene, resonant radiance and a calming, elegant beauty to any room.

It features a 3D wall pattern with integrated NeoPixel LED lighting that reacts to mood, ambiance, and music, creating a dynamic and calming atmosphere in the room. The process includes painting a custom geometric pattern, embedding LED strips along the lines, and connecting them to an IoT controller compatible with Alexa. This allows the lights to change colors and effects based on user settings, producing a visually stunning ambiance that synchronizes with music and adjusts according to mood settings.

Things Needed

1. Wall Duct Tape
2. Wall Paint colours (White, Gray)
3. Wall Paint Roller and Brush
4. Neo Pixel LED Strip
5. Neo Pixel LED Controller with WIFI and IOT Alexa Enabled
6. Wall Glue /Resign
7. 
   

Start by painting the entire wall with a base layer of paint, typically a lighter color like white. This will serve as the color for the line patterns.

Apply Duct Tape for Pattern:

1. Once the base coat is completely dry, use duct tape to create a geometric line pattern on the wall. You can design this pattern to your liking, similar to the example in the image, where intersecting lines form triangles and quadrilaterals.
2. Make sure the tape adheres well to the wall to avoid any paint bleeding.

Apply Second Paint Layer:

1. Paint over the entire wall, including the taped areas, with a second color, preferably a darker shade like gray to create a contrasting effect.
2. Allow the wall to dry completely before proceeding.

Remove the Tape:

1. Carefully peel off the duct tape to reveal the white line pattern against the darker background. This gives a clean, sharp, and beautiful 3D effect to the wall.

Add NeoPixel LED Strips:

1. Using wall glue or resin, affix the NeoPixel LED strips along the line patterns you created. These LED strips will highlight the lines and add ambiance to the wall.
2. Ensure that the LED strips are secured well and aligned with the pattern for a smooth look.

Seal with Resin:

1. Apply a layer of clear resin over the LED strips to protect them and give the wall a smooth finish. This will also diffuse the light slightly, creating a softer glow.