3D Ornaments
What you'll need:
1. 4 pieces of paper (preferably thicker paper)
2. masking tape
3. exacto knife
4. pencil
5. ruler
6. double sided tape
7. scissors
8. art board or surface to cut on
1. 4 pieces of paper (preferably thicker paper)
2. masking tape
3. exacto knife
4. pencil
5. ruler
6. double sided tape
7. scissors
8. art board or surface to cut on
Step 1
Securely tape down papers in a stack to surface and draw flat pattern for your ornament.
Step 2
Use your exacto knife to cut out the shapes. Be sure to hold your knife down firmly while cutting so you get through all four layers. BE CAREFUL!
Step 3
Put one whole cut out piece aside and stack the other three of that same piece on top of each other. Cut these three pieces in half. Do the same for any other ornaments you added to your page. Fold up 1/4" of the half pieces.
Step 4
Use the double sided tape to attach three half pieces to each side of the one solid piece. Hang on your tree, or anywhere you need a cool decoration! And guess what?? you even made yourself a cool stencil out of the left over papers that you cut out of.