350 QX Battery Door Modification
by Withered Perception in Workshop > Electric Vehicles
5283 Views, 37 Favorites, 0 Comments
350 QX Battery Door Modification
![temp_1707940610.jpg](/proxy/?url=https://content.instructables.com/FCT/KYSB/I3VHM8TV/FCTKYSBI3VHM8TV.jpg&filename=temp_1707940610.jpg)
![temp_1707940610.jpg](/proxy/?url=https://content.instructables.com/FZW/FX7I/I3XTSB9Q/FZWFX7II3XTSB9Q.jpg&filename=temp_1707940610.jpg)
First let me thank all of you for the opportunity to be featured here on Instrctables!
I recently purchased a 350 QX3 AP Combo. Last night I heard a strange noise while flying and noticed an object falling from the sky.
Low and behold it was the battery door to my QX. I did some research and found this is a common issue.
This is a simple inexpensive solution to correct the problem.
Photos from previous and upcoming flights can be seen and will be posted on my flickr page:
https://www.flickr.com/photos/whithered_perception/
Videos from flights will be posted to my YouTube page:
https://www.youtube.com/user/brookekathryn1980
I recently purchased a 350 QX3 AP Combo. Last night I heard a strange noise while flying and noticed an object falling from the sky.
Low and behold it was the battery door to my QX. I did some research and found this is a common issue.
This is a simple inexpensive solution to correct the problem.
Photos from previous and upcoming flights can be seen and will be posted on my flickr page:
https://www.flickr.com/photos/whithered_perception/
Videos from flights will be posted to my YouTube page:
https://www.youtube.com/user/brookekathryn1980
Things You Will Need
![temp_-1626414496.jpg](/proxy/?url=https://content.instructables.com/FE0/CV0B/I3XTSBAE/FE0CV0BI3XTSBAE.jpg&filename=temp_-1626414496.jpg)
Scissors
3/4" Velcro
E 6000 Glue
3/4" Velcro
E 6000 Glue
Trim to Fit
![temp_-1787597737.jpg](/proxy/?url=https://content.instructables.com/F0S/D8RF/I3XTSBBA/F0SD8RFI3XTSBBA.jpg&filename=temp_-1787597737.jpg)
![temp_199653156.jpg](/proxy/?url=https://content.instructables.com/F7A/WKAB/I3XTSBBF/F7AWKABI3XTSBBF.jpg&filename=temp_199653156.jpg)
Simply line up Velcro on the edge of the QX and cut.
Glue, Position and Dry
![temp_-1160523468.jpg](/proxy/?url=https://content.instructables.com/FEZ/QQZ2/I3XTSBBG/FEZQQZ2I3XTSBBG.jpg&filename=temp_-1160523468.jpg)
![temp_35835954.jpg](/proxy/?url=https://content.instructables.com/F3D/NPT2/I3XTSBCQ/F3DNPT2I3XTSBCQ.jpg&filename=temp_35835954.jpg)
![temp_-1743200816.jpg](/proxy/?url=https://content.instructables.com/F12/53ZA/I3VHJQCO/F1253ZAI3VHJQCO.jpg&filename=temp_-1743200816.jpg)
![temp_564994365.jpg](/proxy/?url=https://content.instructables.com/FN6/KHNF/I3VHJQCR/FN6KHNFI3VHJQCR.jpg&filename=temp_564994365.jpg)
Spread a very thin layer of E6000 glue on the back of the trimmed Velcro as so no excess squeezes out. Place in desired location and let sit.
Trim Reinforcement Strip
![temp_-108580052.jpg](/proxy/?url=https://content.instructables.com/FO8/ORNZ/I3VHJQCT/FO8ORNZI3VHJQCT.jpg&filename=temp_-108580052.jpg)
![temp_642971180.jpg](/proxy/?url=https://content.instructables.com/FCE/1ANY/I3VHJQCV/FCE1ANYI3VHJQCV.jpg&filename=temp_642971180.jpg)
![temp_1775805066.jpg](/proxy/?url=https://content.instructables.com/F3X/017V/I3VHJQCW/F3X017VI3VHJQCW.jpg&filename=temp_1775805066.jpg)
Flip Velcro upside-down so it doesn't stick while you are positioning reinforcement strip, and cut it.
Finished
![temp_911850328.jpg](/proxy/?url=https://content.instructables.com/FUG/3UOW/I3VHJQCY/FUG3UOWI3VHJQCY.jpg&filename=temp_911850328.jpg)
And just like that you have an easily removable battery door reinforcement
Check out my photo and video pages:
www.youtube.com/brookekathryn1980
https://www.flickr.com/photos/whithered_perception/
Check out my photo and video pages:
www.youtube.com/brookekathryn1980
https://www.flickr.com/photos/whithered_perception/