3 Easy Steps to Make a Silicone Mold

Here is a short description on how to make simple and fast silicone mold for small objects. You need only materials available in your closest store or even in your garage.

WARNING: BREATHING SILICONE VAPORS CAN BE DANGEROUS FOR YOUR HEALTH !

- pure silicone not fast drying type (on tube preferably for easy handling)

- oil (for example WD40 which you can find it anywhere)

- rubber gloves (recommended)

- dust mask (recommended)

- small box (optional; to place your model inside for better looking of final mold)

- place object on a piece of plywood/metal plate/piece of window glass

- if you use optional box, place your model inside

- spray WD40 on your model (and on box walls if used)

- pour silicone slowly using circular movement to cover all areas from down to up and avoid formation of air bubbles; cover your model entirely

- another method is to pour silicone in one bucket with water and liquid soap, collect with your hands, make a ball and the apply around model; water prevents silicone on sticking to your hands and dry faster that expected

- wait for silicone to cure about one day (or you can check by finger after few hours)

- after silicone is cured, remove slowly from model

- if necessarily carefully cut on one side the mold, along your model, but make an zig-zag cut not one line

* my final product is not finished; I have to trim edges and maybe to smoother surface somehow...