3 Bight, 7 Lead Turks Head Lanyard/fob/luggage ID
2302 Views, 8 Favorites, 0 Comments
3 Bight, 7 Lead Turks Head Lanyard/fob/luggage ID
The 3B, 7L TH is perfect to combine with other knots to make an attractive multi-use knot
First make the TH. Bring Working End (WE) from left to right around mandrel two times
Bring WE from right to left under, over . . .
and to front of mandrel.
Bring WE under, over . . .
. . .and to front of mandrel.
Bring WE over, under, under. over . . .
. . .and to front.
Bring WE over, under, under, over . . .
and last pass to complete the weave - under, over, under, over, under, over.
Tighten the knot. Take hemostat and pull a separate length of cord through the knot to give a loop at the top of the knot and four strands to tie together to finish the knot
I am giving here a synopsis of my instructable. . .That is why you see a contrasting color. Go to
. . .
.https://www.instructables.com/id/Crown-and-Wall-Kn...
. . .for a step by step description
First tie a counter clockwise crown knot. Each strand goes over the strand to its left..
Then tie as counterclockwise wall knot. Each strand goes under the strand to its left.
The wall knot strands will end up adjacent to a crown knot strand. Take any wall knot strand and bring it across the knot as shown, going under one crown knot strand.
Repeat with the other strands.
Put a hemostat through the center of the knot and pull the appropriate strand through the center of the knot as shown. Repeat with the other strands
I have written two other instructables that would also go well with this TH knot.You might want to try them