2X4 Airsoft Gun Rack
I saw that there was a 2x4 contest and I needed a gun rack, so here is the 2X4 Airsoft Gun Rack! 2X4s are super easy to come by and I got mine for free!
Get a 2X4.
I used a 12 foot long one. This project used about half of it.
Measure and Cut Your Wood.
The top 2 pieces are 38 inches long.
The bottom pieces are 18 inches long and cut at a 45 degree angle.
Cut 2 Pieces 10 Inches Long.
Screw the 10 Inch Pieces to the Long Boards.
After Screwing the Boards Together, Lay the Guns on the Boards and Mark Where You Want the Mounts.
Polyurethane!
Use Application Instructions on Can.
I recommend using a foam brush and 2 coats.
Screw in the Screws.
Set the Guns on the Screws and You're Done.
I still have to mount it to my bedroom wall, and I'll do an I'ble about that too!
Please Vote for This Project in the 2X4 and Leftovers Contest!!!
