24 Watt LED Lamp.

This high power LED lamp is made out of a discarded PVC pipe of 110 mm diameter.

I have used 24 numbers of 1 watt LED’s which gives a powerful light, and is very good for lighting up your work table when you

require more light to do some intricate work.

1. AC Transformer 12 volts by 2 Amps.

24 numbers 1 watt LED’s.

1. Capacitor of 470uf 35 or 60 volts.

4. Diodes 1N 4007 for bridge rectifier.

1. On Off switch.

Wires, solder etc……

Take a PVC pipe and cut it to your required length, the Diameter of the pipe should be big enough to fit in the Transformer.

Cut the PVC pipe from the top leaving about 4 inches from the bottom

to place the Transformer, as shown in the diagram. Fix hinges on the top of the cut

out portion so that it opens and closes as per your need.

Now take a flat PVC sheet and cut it to the required size to fix the LED’s on to it.

Fix Four rows of 6 LED’s with Dendrite so that the LED’s stick to the PVC sheet.

Make small holes on the sheet to connect the LED’s with wire.

Follow the Circuit and solder the LED’s and connect it to the output of the Transformer.

Place the switch where ever you want.

Here you will find how the LED panel and Transformer is placed.

Here you can see the Closed and Open positions of the Lamp.

Now your light is ready, Plug in, switch on and Enjoy….