2 Strand Long Matthew Walker Knot

by asemery in Craft > Art

3973 Views, 8 Favorites, 0 Comments

2 Strand Long Matthew Walker Knot

mwk 001.JPG
long mwk 009.JPG
long mwk 010.JPG

The 2 strand matthew walker knot is suitable for lanyards, zipper pulls, key ring fobs. It is s good knot for finishing off a two strand bit of knotting.

When tied using a series of wall knots aligning the strands can be a bit fiddly.

Tying the knot around a mandrel overcomes this problem

2 strand mwk 001.JPG
2 strand mwk 002.JPG

With a rubber band attach two pencils (small dowels) together.

Attach your cord to the pencils as shown

2 strand mwk 003.JPG

Take either strand and bring it between the pencils and wrap around desired number of times.

2 strand mwk 005.JPG

And bring the end through those wraps (making a overhand knot in the middle.

2 strand mwk 006.JPG

Bring the other end on the other side through the wraps.

2 strand mwk 007.JPG
2 strand mwk 009.JPG

And begin to wrap the end one time.

2 strand mwk 010.JPG

Two times.

2 strand mwk 011.JPG

Three times

2 strand mwk 012.JPG

And four times.

2 strand mwk 013.JPG
2 strand mwk 014.JPG

With a hemostat, needle nose pliers, grab the end and pull it through the knot (making overhand knot in the middle)

2 strand mwk 016.JPG
2 strand mwk 018.JPG
2 strand mwk 019.JPG

Remove one pencil and start to tighten. Remove remaininng pencil and complete tightening process.

long mwk 001.JPG
long mwk 002.JPG
long mwk 003.JPG
long mwk 004.JPG

You can make this MWK any length. In step 3/4 wrap first strand around one time followed by strand two to get this.

long mwk 005.JPG
long mwk 006.JPG
long mwk 007.JPG

Likewise if you wrap around twice times you will come up with this

long mwk 008.JPG

Wrap three times

long mwk 010.JPG

Using two colors gives a striped result