$2 GoPro Pole Mount
If you need to buy PVC pipe cement the cost may be a few dollars more. I had some on hand already. Either way the project wont be more than $10 at most.
Things You Will Need
- A pre-cut 2 ft. piece of half inch PVC pipe (or any length you wish)
- A half inch end cap
- A 1/4 inch bolt (fits the gopro tripod mount)
- A washer and nut to fit the bolt
- A drill and 1/4 inch drill bit.
- Clear PVC cement
- Spray Paint (optional)
Carefully Drill a Hole in the Center of the End Cap
Insert the Bolt Through the Bottom of the End Cap and Then Put on the Washer Nut
Use the PVC Cement to Glue the End Cap on to the Pole and You Are Done
If You Wish You Can Paint It a Different Color
