2 Gaint Monitor Stand From All SCRABS

I made this experiment of 2 x 23" LCD monitors in one base out of all scrabs, it's the 2nd time made this, the better one yet. welcome comments and criticals.

1. 2 x metal bars (any kind) can joint the 2 monitors head to head from behind.
2. piece of bar or anything can attach solidly with the TV base
3. for 2 x 23" LG monitors, I used a 32" philis TV base
4. screws and plastic

I used a TV base attached with a metal arm piece from a trash satellite dish, which the other parts of it is converted to a garden planter, you can see in my other instructable: https://www.instructables.com/id/Satellite-Dish-An...

The tv obviously hangs up on the wall now. I did not modify the functionality of the TV base, this means when I want it back together, I just can do it. yeah, I got to get another base from somewhere.

This part I stored a broken aluminum corner bar among rest of things from construction years ago (You got it, I knew nothing was trash)

it was easy to screw to this one, there were holes every 1/4 inch.

this piece of the satellite dish, enough strong, and has a little hook at the top, instead of screw them, I just insert a piece of iron wire (see the 3rd picture)

the rest is shown in the picture. not pretty but works.

Nothing to complain aH? it's strong and light has a very good base plate! for my much better than DIY homebrew. and it's practically trash when your TV is on the wall.

Enjoy!