2 Cycle Gas to Steam Conversion Kit
by Daves Homestead in Workshop > Energy
9777 Views, 10 Favorites, 0 Comments
2 Cycle Gas to Steam Conversion Kit
My name is David Nash.
My business plan is to provide an kit that allows the simple conversion of gasoline powered 2 cycle engines into steam powered engines.
There is a lot of interest in this project and numerous designs to do the conversions, however, it can be hard for the average consumer to find the parts locally, as well as to measure and create the push rods to allow the device to operate.
My goal is to not only build a turn key kit, that allows the user to simply screw the product into the spark plug port on a stripped two cycle engine, but to create accessories that allow the purchaser to convert the engine output into usable energy such as electrical or motive power.
In a disaster situation or a rural or depressed area where gasoline is not readily available, this product can provide life sustaining power just by burning scrap wood.
The majority of the funds would be to source the parts needed, as well as to create push rods for specific engine models, the rest would be to prototype and design a pull starter to safely start the engine, as well as to design mounting adapters and brackets for attaching generators.
I would market this though my website www.tngun.com, as well as through my youtube channel www.youtube.com/tngun, and the various forums and groups I am affiliated with.
My business plan is to provide an kit that allows the simple conversion of gasoline powered 2 cycle engines into steam powered engines.
There is a lot of interest in this project and numerous designs to do the conversions, however, it can be hard for the average consumer to find the parts locally, as well as to measure and create the push rods to allow the device to operate.
My goal is to not only build a turn key kit, that allows the user to simply screw the product into the spark plug port on a stripped two cycle engine, but to create accessories that allow the purchaser to convert the engine output into usable energy such as electrical or motive power.
In a disaster situation or a rural or depressed area where gasoline is not readily available, this product can provide life sustaining power just by burning scrap wood.
The majority of the funds would be to source the parts needed, as well as to create push rods for specific engine models, the rest would be to prototype and design a pull starter to safely start the engine, as well as to design mounting adapters and brackets for attaching generators.
I would market this though my website www.tngun.com, as well as through my youtube channel www.youtube.com/tngun, and the various forums and groups I am affiliated with.