1940 Radio Computer Case
![DSC00326.JPG](/proxy/?url=https://content.instructables.com/F5K/ULUW/HHMI529H/F5KULUWHHMI529H.jpg&filename=DSC00326.JPG)
![DSC00331.JPG](/proxy/?url=https://content.instructables.com/FA6/1UGO/HHMI529B/FA61UGOHHMI529B.jpg&filename=DSC00331.JPG)
![DSC00327.JPG](/proxy/?url=https://content.instructables.com/F5D/LF2F/HHMI529A/F5DLF2FHHMI529A.jpg&filename=DSC00327.JPG)
![DSC00340.JPG](/proxy/?url=https://content.instructables.com/FO6/Q4W7/HHMI529F/FO6Q4W7HHMI529F.jpg&filename=DSC00340.JPG)
![DSC00341.JPG](/proxy/?url=https://content.instructables.com/FQ8/EAC0/HHMI529G/FQ8EAC0HHMI529G.jpg&filename=DSC00341.JPG)
![DSC00339.JPG](/proxy/?url=https://content.instructables.com/FT2/S9H1/HHMI529D/FT2S9H1HHMI529D.jpg&filename=DSC00339.JPG)
![DSC00338.JPG](/proxy/?url=https://content.instructables.com/FBD/E9X6/HHMI529C/FBDE9X6HHMI529C.jpg&filename=DSC00338.JPG)
1940's TRUETONE radio. Removed radio parts, refinished the wood and hardware. Installed a DVD/RW, modified and installed a Compaq computer chassis. Mounted a 120MM cooling fan where the speaker use to be. The on/off and tuning knobs are now push button controlling on/off functions and reset. Installer yellow LED lights to illuminate the dial face - gives it a nice golden glow like the original. The two small holes above the speaker opening are the power and HD activity lights. Unit has a full size power supply and micro-ATX motherboard and an extra cooling fan in the rear. All modifications were TRIAL and ERROR - measure, measure, cut. The unit was fully functional and I used it daily for a couple of years.