180 Eachine: Part 2 - Motors and Frame

This Part continues to build a modified 180 Eachine Falcon.

Attach the motors to the esc's

I remove the shrink wrap around the esc and attach th motor directly.

I shorten the motor wires and re-soldered them to the board.( always keep in mind you might have to change the wires during esc caliberation for rotation purposes) Re-shrinkwrap the esc.

You can use this forward slant mount. It helps keep the drone from leaning to far forward for forward flight. Not good for hovering. Use motor screws to mount to slant mount. use flat head screws to mount slant mount to frame.

Now repeat and finish the other three.

Now move onto Part 3

If you have comments please offer it. I'm learning as you are learning.

Thank you for your patience.