12V Battery Protection

Hey! everyone My name is Steve 19 year old from India

Today i'm going to show you How to make a 12V Battery Protection Board .

Very Low Current Consumption Only 1.5mA

Click Here to See The Video

It will protect your battery from Over Discharging



• Cutoff at 10.6V
• Re-Connect at 12.5V


How To Programme ATtiny85

Click Here to See The Video

• ATTINY13 click
• 82K 1% Resistance click
• 20K 1% Resistance click
• 4K7 Resistance click
• 220pf Ceramic Capacitor click
• DC-DC step-down Converter click
• IRF3205 Mosfet click

If you Don't Know How to make a PCB Then

Click Here to See The Video

• Printed The Layout
• Cut The Copper Clad
• Press With Hot Iron

See The Image For More Information

• Put The Copper Clad On Ferric Chloride
• Remove the Ink
• Drill The Holes

• Solder the components

• Solder The Connector For Inlet And Outlet

• Hot Glued The Wire to prevent from loosing

• Just Plug The Battery and you are Good to go