1 Minute Fully Adjustable Solder Fume Fan !

This took one minute to make so i will make this one minute to read !

Fully adjustable solder fume fan.

Parts list:

- Salvaged computer fan

- €1 tripod

- Salvaged 12v ac charger.

Tools:

- Pliers

- Electrical tape or shrink tube

- Soldering equipment

- Glue

- Drill if required.

What I did:

I took a 12V pc fan that has been sitting in my parts bin for a decade, i drilled one of the mounting holes so the bolt of the tripod would fit inside and glued it with hot glue

Then i took a 12v charger from my parts bin, soldered the 12V line and ground on the fan cable, some electrical tape and voila.

Now i have a fully height and angle adjustable solder fume fan.

Or something to blow in my face on a hot day.

Have fun !